CAT24C512YI-GT3
CAT24C512YI-GT3 ON IC CHIP
512 kb I2C CMOS Serial EPROM
Delivery
EXW
minimum order
100 pieces
Supply Ability
2800pieces / Day
Country of Origin
Thailand
Stock Time
1Day
Quantity
US $0.50 - US $2.00
/ pieces
CAT24C512YI-GT3 electronic chip power ic drive ic Transistor power chip
512 kb I2C CMOS Serial EPROM
Description
The CAT24C512 is a 512 kb Serial CMOS EEPROM, internally
organized as 65,536 words of 8 bits each.
It features a 128−byte page write buffer and supports the Standard
(100 kHz), Fast (400 kHz) and Fast−Plus (1 MHz) I2C protocol.
Write operations can be inhibited by taking the WP pin High (this
protects the entire memory).
External address pins make it possible to address up to eight
CAT24C512 devices on the same bus.
Features
• Supports Standard, Fast and Fast−Plus I2C Protocol
• 1.8 V to 5.5 V Supply Voltage Range
• 128−Byte Page Write Buffer
• Hardware Write Protection for Entire Memory
• Schmitt Triggers and Noise Suppression Filters on I2C Bus Inputs
(SCL and SDA)
• Low Power CMOS Technology
• 1,000,000 Program/Erase Cycles
• 100 Year Data Retention
• Industrial and Extended Temperature Range
• 8−pin PDIP, SOIC, TSSOP and 8−pad UDFN Packages
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Electronic components are the basic building blocks of electronic circuits and are used to construct various circuits
that enable electronic products to perform various functions. The following are common electronic components and their main functions:
1. Capacitor: used for storing charge, smoothing voltage, filtering, delaying, etc.
2. Resistor: used for limiting current, changing voltage, dividing voltage, regulating current, etc.
3. Diode: used for rectification, voltage stabilization, switching, etc.
4. Transistors such as thyristors and triodes: used for signal amplification, current control, switching, etc.
5. Integrated circuits (ICs): integrate multiple electronic components to achieve complex circuit functions.
6. Sensors: convert various physical quantities into electrical signals, such as temperature, humidity, light intensity, pressure, etc.
1. Capacitor: used for storing charge, smoothing voltage, filtering, delaying, etc.
2. Resistor: used for limiting current, changing voltage, dividing voltage, regulating current, etc.
3. Diode: used for rectification, voltage stabilization, switching, etc.
4. Transistors such as thyristors and triodes: used for signal amplification, current control, switching, etc.
5. Integrated circuits (ICs): integrate multiple electronic components to achieve complex circuit functions.
6. Sensors: convert various physical quantities into electrical signals, such as temperature, humidity, light intensity, pressure, etc.
