AT24C512C-SSHD-T
AT24C512C-SSHD-T ATMEL SOP-8
24-bit, 7.2kSPS, 5-ch delta-sigma ADC with PGA and AC excitation for low-noise bridge sensors 32-VQFN -40 to 125
Delivery
EXW
minimum order
10 pieces
Supply Ability
1200pieces / Day
Country of Origin
PHI
Stock Time
1-2Day
Quantity
AT24C512C-SSHD-T
AT24C512C-SSHD-T Product details
Description
Description
The Atmel® AT24C512C provides 524,288 bits of Serial Electrically Erasable and Programmable Read-Only Memory (EEPROM) organized as 65,536 words of eight bits each. The cascadable feature of the device allows up to eight devices to share a common 2-wire bus. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.
Features
Low-voltage and standard-voltage operation
1.7V (VCC= 1.7V to 3.6V)
2.5V (VCC= 2.5V to 5.5V)
Internally organized as 65,536 x 8
2-wire serial interface
Schmitt Triggers, filtered inputs for noise suppression
Bidirectional data transfer protocol
400kHz (1.7V) and 1MHz (2.5V, 5.5V) compatibility
Write Protect pin for hardware data protection
128-byte page write mode
partial page writes allowed
Random and sequential read modes
Self-timed write cycle (5ms max)
High reliability
Endurance: 1,000,000 write cycles
Data retention: 40 years
Green package options (Pb/Halide-free/RoHS Compliant)
8-lead JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead TSSOP, 8-pad UDFN, and
8-ball VFBGA packages
IC chip power ic IC chip power ic IC chip power ic
Electronic components are the basic building blocks of electronic circuits and are used to construct
various circuits that enable electronic products to perform various functions. The following are common
electronic components and their main functions:
1. Capacitor: used for storing charge, smoothing voltage, filtering, delaying, etc.
2. Resistor: used for limiting current, changing voltage, dividing voltage, regulating current, etc.
3. Diode: used for rectification, voltage stabilization, switching, etc.
4. Transistors such as thyristors and triodes: used for signal amplification, current control, switching, etc.
5. Integrated circuits (ICs): integrate multiple electronic components to achieve complex circuit functions.
6. Sensors: convert various physical quantities into electrical signals, such as temperature, humidity, light intensity, pressure, etc.
Electronic components are widely used in various electronic products such as computers, mobile phones,
1. Capacitor: used for storing charge, smoothing voltage, filtering, delaying, etc.
2. Resistor: used for limiting current, changing voltage, dividing voltage, regulating current, etc.
3. Diode: used for rectification, voltage stabilization, switching, etc.
4. Transistors such as thyristors and triodes: used for signal amplification, current control, switching, etc.
5. Integrated circuits (ICs): integrate multiple electronic components to achieve complex circuit functions.
6. Sensors: convert various physical quantities into electrical signals, such as temperature, humidity, light intensity, pressure, etc.
Electronic components are widely used in various electronic products such as computers, mobile phones,
televisions, audio, automotive electronics and more. Their function is to transmit, process and convert signals in
the circuit to provide the foundation for electronic products to perform various functions.
Sharon Business Director